This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the Electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

This thesis aims to examine the viability of various techniques for increased electricity generation in CHP plants and the effect of electricity price fluctuations on the profitability.The techniques examined are fuel dryer, pellet production, methane production, combined methane- and pellet production, seasonal heating storages in caverns and pit heat storages and condensing tail. Using Excel and Matlab, the prerequisites for investment costs, revenues and expenses were calculated.What affects the price of electricity is a combination of economic and technological development, energy prices, economic structure, population changes and weather. Different scenarios for the electricity price were therefore examined. In the base case, the electricity price was given by the Nord Pool electricity price statistics of area three in 2011. Thereafter, WiMo was used to design the electricity scenarios for 2030, which was then applied to the data to obtain the viability of various scenarios. The techniques examined were found to give greater profits to the CHP plant by increasing and optimizing the production of electricity.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

This thesis is commissioned by the Swedish electricity trading company GodEl with the purpose of evaluate solar electricity in multi-family buildings in the Stockholm region. The prices of solar panels have dropped recently due to the advances in technology, but the installation rate in Sweden remains low. It is therefore interesting to study the  profitability of solar electricity today, and if it is profitable enough to install based on profitability alone and not simply due to environmental considerations. Therefore this thesis first studies the profitability of solar panels based on a simulation of Electricity production and consumption for multi-family buildings this region. The study concludes that solar electricity can be profitable in the Stockholm region under certain conditions; all of which have to be favourable for profitable solar electricity.The thesis also studies the opinion of the company's costumers concerning solar electricity.

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.

Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and Electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

1st of may 2003, a new energy system based on electricity certificates, was initiated in Sweden. The purpose with this system, is to stimulate an enlargement of energy production from renewable sources. The electricity system, ist built on that the producers of energy from renewable sources confer a electricity certificate from the government for every produced MW energy from renewable sources. The electricity certificate is supposed to be turned over and with that generate reciepts to the producers. Furthermore there is an obligation for the energyusers und energysuppliers, that means that the users and the suppliers every year the 1st of april got to have electricity certificates in proportion to their energy consumption during previous year.

Cost allocation ? a study of how Swedish energy companies allocate costs between electricity and district heating in a combined heat and power plant District heating is today the most utilized alternative for heating in Sweden. In a combined heat and power plant (CHP) electricity and heat are cogenerated. The environmental and economic advantages with this kind of production are high. A problem in a CHP-plant is to allocate costs between electricity and heat since both products are generated in the same process.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.